air purification in work

The cartridges in the Monroe collector are mounted in a vertical position. This assures that when the collected dust is pulsed from the cartridges, it falls to the bottom of the collector. In units with horizontal catridges, dust pulsed from above cartridges falls onto cartridges below. This reduces filtration capability and additional maintenance for rotating cartridge is necessary. This is avoided in the Monroe unit. The Monroe cartridges are easily accessed with pull out racks when replacement is necessary. The Monroe Cartridge Dust Collector is available in capacities from 500 CFM to 50,000 CFM in a single unit and may be integrated with existing ductwork and ventilation systems. An AMCA rated fan on the outlet side of the collector with either a direct coupled motor or an optional "V" belt drive. Flexible duct connections, fan mounting isolators sound attenuators and fan closures are available. Integral Pressure Gauges are available to indicate when filter maintenance is required. Standard dust removal is via a slide gate. Options include rotary air locks or an integral screw conveyor. Complete electrical controls are availiable to meet customer requirements. Heavy gauge steel is used for most installations, but special construction materials are available to meet specific applications.

The Monroe Coalescing Oil Mist Collector is designed for continuous draining during operation, resulting in typical filter media life of 4,500 hours or more, even under heavy inlet loading. The Monroe Coalescing Oil Mist Collector, with longer operating cycles and higher collection efficiency, outperforms all other collectors. Because of slower internal velocities through the collector, medial replacement and maintenance labor costs are reduced. Collected oil mist and solids are continuously drained from the media without shut-down, significantly prolonging filter life and lowering overall operating costs. Monroe Coalescing Oil Mist Collectors are available in various configurations to meet your needs. Units can be suspended from the ceiling or other supporting structures to conserve floor space. Wet air scrubbers are designed to remove airborne particulates, contaminants, gases and odors from industrial exhaust and chemical processes. Remove Airborne Particulate Matter The Monroe DualScrubber is designed to remove both heavy and light airborne particulate matter from industrial exhaust systems, as well as flue and process gasses. The Monroe Dual Air Throat Scrubber is a completely self contained unit that needs only to be connected to normal plant electrical, water and air systems.

Minimum Wash Liquid Requirements Waste Water disposal problems are eliminated under normal operating conditions. Each unit has a self-contained wash liquid reservoir and recirculating pump. An automatic water valve replentishes wash liquid lost through evaporation. A high kinetic energy is imparted to the particles contained in the dirt-laden air, and the airflow itself causes a high degree of atomization of the wash liquid. Welded seams and built-in lifting hooks provide rugged durability. Large, easy to open access doors, each with air tight seals, are provided for inspection and catridges servicing. Monroe Cartridge Dust Collectors can be configured to meet specific needs with options for most applications. Air processed by the Monroe Spiral Tube Collector meets air quality standards for in-plant discharge as well as outside exhaust. Discharging clean, filtered air back into the work area can significantly reduce climate control costs. Monroe Environmental Corporation provides air-scrubbing systems for difficult pollution control problems encountered in high temperature processes such as flame laminating and glass coating.